High Speed Tone Dialing:
The system allows use of high speed tone Dialling which is being offered by MTNL/DOT on their new electronic E-10B exchanges by use of the latest DTMF technology.
Global Speed Dialling:
The system provides memory of 30 to 100 numbers through Abbreviated Dialling of frequently used numbers. These are coded with 3 digits and stored in the exchange to dial whenever required.
Personal Speed Dialling:
The system allows 10 numbers per extension as personal memory numbers. These frequently dialled numbers can be coded with digits and stored in the exchanges to dial whenever required.
Day/ Night Mode Operation:
This feature allows calls to be received by the operator during day time. During night mode the calls can be received by a different set of programmed extensions.
Extension Transfer:
The call on the extension can be transfered to another / any extension.
Extension Call Back:
If the called extn. is busy, this feature if used will inform the calling extn. as soon as the called extn. is free.
Redial:
If the called No. (Extn. or P&T No.) is found busy or not answering, simply hang up get dial tone again and press redial key.
Pick Up:
If some other extn. is ringing and is unattended, other extns. can attend this call by either direct call picking or indicative call pick-up.
Call Forwarding:
If you are moving from your extension to some other extension you can programme to get calls coming to your orginal extensions, transfered to indicated extension automatically.
Follow Me:
This will help you set your calls following you at any other extension you are available.
Line Hunting:
This function will search the line free for the user and will reduce the load on any single line.
Line Queing:
If all available lines are busy this feature will inform the user automatically when the line is free
Do Not Disturb:
This feature will allow the user to dial out any number, but will disallow dialling in from other, keeping the extn.undisturbed.
Barge In:
In case of emergency, if the called extension is found busy, this feature will enable you to barge in to the conversation of the called extension (with or without warning signal tone to him).
Privacy:
This feature enables the user to be undisturbed by any other extn. and will prohibit even barging in.
Hot Line:
If a fixed communication between Extn. to Extn. or Extn. to line is desired, with this feature, just pick up handset and start communication with Hot Line Station without dialling procedures.
Call Park:
This feature can park a call so that the extn. goes to free status to do other things.
Pick Up A Parked Call:
The parked call can be picked by any other extn.
Call Camp On:
If an extension is busy on line and other extension intends to transfer another call to the same extension, use camp on feature.
Call Waiting:
If you do not want to teriminate your present call while another call is camped on your extension then with this feature, you can alternatively talk to both the parties.
Add-On Conference:
This systems will allow simultaneous conference between the extensions or between extensions & P&T Lines. (Max.parties are limited to 5 on conference mode.)
Alarm Clock:
Each extension can set its own alarm for a preset time.
Paging:
If Paging system (amplifier system) is connected to the exchange each extension can use paging facility.
Direct Line Access:
This feature can help the user to pick up a particular line connected to the system.
Local/ISD/STD Restriction:
This powerful feature can help organisation to allow/disallow, Local/STD/ISD facility at different extns.
Printer Interface:
This feature allows printer to be attached to the system to monitor both incoming as well as outgoing calls from any extensions.